cancel
Showing results for 
Search instead for 
Did you mean: 

Call forwarding trick - rejecting spam (and all other) calls is not working anymore???

Yummy
Mayor / Maire

I used to use trick to forward all calls to some invalid number.

Trick worked very well for a while and I was surprised when spam call left voice mail.

I tried to apply forwarding again but got a message 'Connection problem or invalid MMI code'.

 

Reading closely at https://www.publicmobile.ca/en/bc/get-help/articles/call-forwarding it looks like all suggested options Except Unconditional are NOT working anymore UNLESS you use VoLTE.

Unconditional is not really helpful as phone is not ringing no matter who calls thus rejecting ALL calls.

So it looks like I (and the others) have to wait for VoLTE to be activated on our lines.

14 REPLIES 14

Thanks EVERYBODY for prompt support.

I applied @hairbag1 solution and it works PERFECTLY! Tried it calling from land line and - yes! nobody can leave vmail anymore. Finally...

sorry @Yummy there is no way to completely turn away spam calls without going to voicemail 

but did you try the trickw mentioned in your earlier post?

https://productioncommunity.publicmobile.ca/t5/Get-Support/Call-forwarding-trick-rejecting-spam-and-...

and please check what @Nezgar suggested 

https://productioncommunity.publicmobile.ca/t5/Get-Support/Fun-with-Conditional-Call-forwarding-and-...

@Yummy  I think you can set the voice mail to extended absence and no one can leave voicemail then it will just ring 

adding @Yummy 

Extended absence Follows the following flowchart:

[3]Greetings --> [4]Extended Absence --> [7]Delete 

Handy1_0-1731512066664.png

 

 

@Yummy 

use the Extended Absence option and you can disable the messages.

added...(thanks to @Tanias )

To set it up, from the voicemail main menu:

3 to “Manage your greetings”

4 to “Manage your Extended Absence Greeting”

2 to record an extended absence greeting (can be a few seconds of silence)

4 to turn on Extended Absence Greeting

5 to block callers from leaving a message

Yummy
Mayor / Maire

I blocked annoying (the same) number but they still manage to attempt to leave voice mail. I got 'silence' as vmail but it is still annoying to go into vmail and delete it.

After searching on Internet it looks like blocking number just stops your phone ringing but they can still leave vmail.

Is there any way to completely Stop getting vmail (from everybody if that is a solution)? I see there are some apps (Android) to do that but did anybody try them? Any free app to do that?
Any other solution to 'deactivate' voice mail? My phone is not VoLTE activated nor cannot be. Samsung S7.

Pawprints1986
Deputy Mayor / Adjoint au Maire

I do use that if I'm asleep yes... If awake and I don't know who it is I leave it and Google the number after, if the results are Chinese symbol crap it's blocked

Haven't had a problem yet with one being real

🤷

Hi @Yummy , maybe @Pawprints1986 uses Silence Unknown Callers feature 


@Pawprints1986 wrote:

Why not just block the junk? 🤔

 


How are you suppose to block zillion spoofed numbers? Each of them could be legitimate number calling you for a valid reason in the future.

Trick with call forwarding worked very well until this VoLTE mess come into play. Innovation and technology does not always make life easier...

@Pawprints1986  Because blocking just sends the caller immediately to your voicemail where you are then further annoyed with junk voicemail messages you have to call in to delete. Also, junk calls usually use random caller IDs so the number is always different, so what you suggest is actually kind of hard to implement in practice. I mean, there are some third-party apps that will check all incoming calls against an external database, but...

 

Customizing the conditional forward for declined or blocked calls would previously allow you send those calls to a dead end or some other destination instead of your voicemail.

Pawprints1986
Deputy Mayor / Adjoint au Maire

Why not just block the junk? 🤔

 

Seems like this just makes things harder for no reason

 

Some providers have it where callers have to press a number before the call will go through, that'd be cool to get here... But yeah I just block the junk. When asleep I use DND with exceptions for people I know who may have legit emergency and need to call. 

LitlLdy
Mayor / Maire

@Yummy wrote:

I used to use trick to forward all calls to some invalid number.

Trick worked very well for a while and I was surprised when spam call left voice mail.

I tried to apply forwarding again but got a message 'Connection problem or invalid MMI code'.

 

Reading closely at https://www.publicmobile.ca/en/bc/get-help/articles/call-forwarding it looks like all suggested options Except Unconditional are NOT working anymore UNLESS you use VoLTE.

Unconditional is not really helpful as phone is not ringing no matter who calls thus rejecting ALL calls.

So it looks like I (and the others) have to wait for VoLTE to be activated on our lines.


@Yummy , Having VoLTE activated on my account messed it up! The only way I was able to get mine working again was to submit a support ticket & ask for a Senior CSA (due to some CSA’s have no clue how to) to fix it on their end! Now it all works fine! They fix 1 thing & break several more things! 🤣

Nezgar
Mayor / Maire

Yeah the ability for me to configure custom "conditional" call forward settings stopped working when my line was provisioned for VoLTE. I can still set "unconditional" forwarding though.

 

I have yet to try opening a ticket to try to resolve this with VoLTE, as @LitlLdy succeeded with.

 

It was fun to send junk calls to a dead-end or Lenny in the past...

dust2dust
Mayor / Maire

Call forwarding all works for all. Call forwarding conditionals only work for volte with some support needed (per LitlLdy)

hTideGnow
Mayor / Maire

HI @Yummy 

 

you sure unconditional forwarding will work with VoLTE  if you select it and use it?

We know all forwarding were not working since the introduction of VoLTE (except the forward to VM when not available), look like no solution and definitely not sure if using VoLTE would make it works again

 

Need Help? Let's chat.