04-14-2017 11:55 AM - edited 01-05-2022 01:57 AM
04-15-2017 11:31 PM
@echf oh I just read an announcement post from Dave
Apparently they have updated port process so the older bugs have possibly been fixed
04-15-2017 11:25 PM
@echf the actual porting itself is fairly reliable (to transfer the number from old carrier to Public)
The main issue is in assigning the number (or any number if you choose a new Public number)
The system really falls apart during the phase where number will be assigned
I am very skeptical the system is identical to Koodo (Koodo seems more reliable here, and Koodo also has some issues I have never seen/heard of on Public)
04-15-2017 04:16 PM - edited 04-15-2017 04:20 PM
@kav2001c wrote:@echf no. There are numerous things to be cleaned up.
Their issues are far more severe than the slow loading website issues.
@echf wrote:I believe PM's backend system is quite reliable, but not their frontend webpage.
Care to share more? I mean I still believe PM's porting system is reliable backend, there is no evidence showing PM's porting system is the reason causing porting issues. I guess PM share the same porting system with Koodo (Just speculation, since PM can port Koodo number in seconds). If Koodo doesn't have problem with their large userbase, I bet PM is going to be okay. Problem happened usally because human mistake.
Of course their self service portal is pretty buggy, and their subsystem like billing system. Always some mysterious bugs and very outdated user interface. They should rewrite it completely!
04-15-2017 10:02 AM
04-15-2017 09:01 AM
@echf Good points about the user feedback and validation. I think it was easy for me because it's not my fourth or fifth time activating an account, so I knew exactly whta to expect. One line ported over in minutes, while the other took several hours. Both are normal in my experience going between any two carriers, and there's no real explanation for it. The line that had an actuve tab attached actually was faster.
I think a bit more feedback to the user would avoid a lot of request for support. That said, I do agree with @kav2001c that there are some fundamental issues on the backend that ends to be address. Things like future dated plan changes and use of same credit card for multiple accounts. Heck, the whole idea that you need a new email for each account.
04-14-2017 11:51 PM
04-14-2017 10:01 PM - edited 04-14-2017 10:02 PM
I believe PM's backend system is quite reliable, but not their frontend webpage.
I suspect some browser and the cache just cause problem. They should update their website with some morden website technology.
AND, human mistake is quite common. You don't know you made a mistake untill the porting failed. Some people type one more character here and one less character there.
I suggest PM should add more foolproof design in their next verison activation system.
1. A confirmation page after the user enter the information.
2. Let user choose their previous carrier, prompt notification when user enter uncommon information (for example, Fido account number is 9 digit but user enter 8 digit).
I think they can add those feature in their next verison activation system
1. Provide estimated porting time
2. Provide APN setup instruction and troubleshooting
3. Direct them to the community
4. Send a email when the porting is taking longer then usual
Public Mobile can do so much more. It can really avoid many bad reputation and unhappy customer
04-14-2017 02:55 PM
There is no such thing as a bad day for leaving Wind/Freedom. Doing the one step port involves a small amount of risk taking. Honesty as buggy as the system may appear to be, it probably works 99% of the time. Tell your folks, welcome aboard.
04-14-2017 01:22 PM
04-14-2017 01:19 PM
@Jonavin wrote:
It was Master Card.
Thanks for the info.
04-14-2017 01:19 PM
04-14-2017 01:17 PM
@Jonavin Just an informal survey; which credit card did you use? Couple of customers just had problems using Visa.
04-14-2017 11:58 AM
Oh, the Winds had changed, then Freedom began to ring, before the Shaw
Alas, not to be
But don't worry, PM is the place to be