07-08-2021 10:18 AM - edited 01-06-2022 02:44 AM
My family switched all four phones from Bell to Public Mobile.
Three of four received texts to activate the port.
I didn't.
I called Bell this morning and they told me I had to call Public Mobile to have the port request resent, but there is no way to phone Public Mobile and request this.
How do I do this???
HELP!
Solved! Go to Solution.
06-17-2022 03:44 PM
@z2301z porting in PM??
you have to call PM porting team and retrigger the process. I will message you the number. Please check your Community inbox on top right
06-17-2022 03:41 PM
I am sorry to bother you but I am in a similar boat. The port request expired and Bell will not continue to port my number over.
12-13-2021 06:12 PM
@AWalker if you are porting out, make sure you are not blocking PM short codes (611 , 4911, etc). If you still unable to receive the text to authorize the porting out, please open ticket using this direct link: https://urlshortner.tiia.ai/Lc9xk8
If you have made a request to port your number to another carrier and have not received an SMS from Public Mobile to confirm your request, please open our chatbot via this link. This will put you in touch with our Customer Support Agents who will be able to assist you.
12-13-2021 05:54 PM
@AWalker I will message you the Porting team number. Please check the Community inbox , top right envelope icon.
12-13-2021 05:52 PM
Can I get this elusive phone number too? Tried activating friday and still no text to confirm and I've called Telus and they said I have to "re-send" the request to activate. Tried re-activating and it says the PM sin is invalid...maybe because it's activated but not activated???
07-08-2021 08:12 PM
It maybe too late but I hope you used a referral code for a $10 discount off your 2nd month bill.
That would be $40 off your August bill.
07-08-2021 03:12 PM
Sounds like you left the Bell SIM on the 3 family phones and you put the PM SIM in your phone.
Things happen…glad that the re-porting process will restarted again.
Welcome to PM and you will see the big savings on your cell phone bill.
07-08-2021 11:11 AM - edited 07-08-2021 06:38 PM
Yes, you need your Bell SIM in the phone.
if you missed the Bell SMS again, call the PM porting team again and they can re-trigger the process.
Actually, it's fast. If you have the old sim in the phone ready, when you call the team, they said they re-triggered, you should get the SMS within a minute.
07-08-2021 11:08 AM
Thanks so much for that number!
07-08-2021 11:07 AM
Thanks! I did call and they resent the port request, but still the text did not come (as it did with the other three phones). (And yes, powered down and back up. Still no text. But I did get an email again telling me to respond to the text!)
Was told to call Bell back. I requested they do it via phone, and I think they have.
Not sure how I'll know for sure. They said it should take 30 minutes.
We did the same process with all four phones. It's just this one that was a problem.
(No one told me to put the old SIM back in the phone. The new PM one is in the phone. Hope that doesn't cause a problem.)
07-08-2021 10:39 AM
Just call the number @Dunkman sent you. It's porting team and they can re-trigger the SMS. Make sure you have your Old SIM in your phone. Once you reply the text, it should complete within 30 mins to 2 hours.
07-08-2021 10:39 AM
The Telus porting team number also handles the ports for Public mobile. You can use this phone number so Public mobile (ie. Telus) can resend request for port from Bell. Otherwise, you can also contact moderator via private messaging/ticketing system, but that will take more time.
07-08-2021 10:26 AM
Sorry to hear about your troubles.
I will private message you the phone number for Telus porting team which handles PM ports also. Only used for porting issues. Check your inbox. Envelope icon on right upper corner of this website.
07-08-2021 10:24 AM
I need an answer to this too!
Three of four of us received our porting text. I didn't.
Bell said I had to call the new service provider (Public Mobile) to have the port request resent. The doesn't seem to be a way to do this, and I'm just getting more and more frustrated with the chatbot.
Does anyone have an answer?