06-28-2021 10:35 AM - edited 01-06-2022 02:56 AM
I have an iPhone 6 and everything works fine when connected to wifi, but when not connected to wifi I don't seem to have any data (even though I have some with my plan) and I can’t send messages to other iPhones. I can’t search the web for anything or use maps etc. I have “send as sms” on so it should send messages even if I don’t have data, but it’s not working. I’ve tried the troubleshooting like manually selecting the public carrier, turning airplane on and off, restarting my phone. Nothing works.
06-28-2021 12:11 PM
can you do try reseat the SIM card
1.power off your device
2.take out the SIM card,
3.wipe it clean SIM card,
4.put it back and power on,
5.toggling airplane mode off/on,
it happened sometime you know, A normal reboot without reset, didn't work. At least try it,
only work after reseating the SIM card.
and do rebooting your phone - This one is quick and simple.
what is mean for Rebooting the phone means to turn off your phone and turn it back on again.
Go to Settings > General > Reset > Reset Network Settings.
This also resets Wi-Fi networks and passwords,
or visit HERE
Changing APN Settings On An IPhone
click HERE
or visit HERE
Changing APN Settings On Android device
click HERE
Ensure you have the correct APN settings by visiting HERE.
Select the brand and model of your phone, After doing so, you will be provided with the exact APNs required for your phone on our network.
Turn your data on to send a Picture Messaging in world-wide,
if your data is off and your home internet wifi is on is not going through the Picture or a video Messaging,
you have to do this to is go through you will need to turn your data on to send a Picture or a video Messaging in world-wide,
make sure your DATA is on.
Good Luck
06-28-2021 11:27 AM
@Asc1 Try turning Messages and FaceTime off for a few minutes, then back on. Will force the Apple servers to reset.
06-28-2021 11:18 AM
you might try to sync to iTunes
1. Insert your working SIM - do not turn phone on (if SIM is already in, turn off)
2. Connect to computer with USB cable.
3. Start iTunes if it doesn't auto run
4. iPhone will switch on. Wait until iTunes registers it and checks for updates
5. Install the carrier profile update (if offered, if not, go to step 6)
6. Disconnect and restart.
06-28-2021 10:52 AM
thank you, it won’t let me change anything for the apn….only for hot spotting
06-28-2021 10:49 AM
@Asc1 wrote:I have an iPhone 6 and everything works fine when connected to wifi, but when not connected to wifi I don't seem to have any data (even though I have some with my plan) and I can’t send messages to other iPhones. I can’t search the web for anything or use maps etc. I have “send as sms” on so it should send messages even if I don’t have data, but it’s not working. I’ve tried the troubleshooting like manually selecting the public carrier, turning airplane on and off, restarting my phone. Nothing works.
Hello @Asc1 ,
Do a RESET of your Network Settings.
If you turn your data off occasionally, then it is recommended to turn off iMessage altogether and use regular text messaging instead.
To do this, go to Settings > Messages and toggle iMessage off.
If you prefer to use iMessage, then you can perform the following steps to fix the issue:
06-28-2021 10:47 AM
@Asc1 if your selfserve doesn't show a data addon in the overview page then it has been used. If it shows the add-on then this link has some good info for iOS
https://productioncommunity.publicmobile.ca/t5/Phones-Hardware/FYI-iOS-and-APNs/m-p/323118#M24562
06-28-2021 10:43 AM - edited 06-28-2021 10:44 AM
Double checking, when you log into your Self Service account, how much data does it show you have remaining?
https://selfserve.publicmobile.ca/
Also, can you double check your APN settings for your data connection?
Name: Public Mobile
APN: sp.mb.com
MMSC: http://aliasredirect.net/proxy/mb/mmsc
MMSC proxy: 74.49.0.18