Monday
Hi all,
My line is currently active on an eSIM in my phone. I want to move it to a physical Public Mobile SIM in an unlocked Netgear Nighthawk MR6500 mobile hotspot. It's a Wi-Fi-only device with no phone.
A few questions:
1. Once the line moves to the hotspot, my phone won't get the SMS 2-step verification codes anymore, and the hotspot can't receive texts the normal way. How do I switch 2-step verification to email only, or turn it off? Should I do this before I switch the SIM?
2. I have an alternate phone number on my account. When will 2-step verification codes go to my alternate number automatically? If they don't, how do I set it up so the codes go to my alternate number instead?
3. How do I move the line from the eSIM to the physical SIM? Is it Self-Serve > Change SIM card with the physical SIM number? Do I need to restart the hotspot afterward?
Also: is sp.mb.com the right APN for a hotspot like the MR6500?
Thanks in advance!
Monday - last edited Monday
your PM sim card should starts with 89122 300##, and then 9 more digits
if you have a PM sim card, you should see the number appear in 2 places, and they should all be the same:
1. the bottom left of the full size card (credit card size) itself, the number on top of a white rectangular box with a bar code right above
2. on the nano sim card itself
if you check the number on the nano sim card , the number will be in 4 lines like this
89122
300##
#####
#### <- as you see the last line should show only 4 digits
if you get a sim card that has 20 digits and also starts with 89122, you might have a wrong card. But check if you enter one two many digits by mistake. Like entered 300000 instead of 30000
Monday
is that a Public Mobile sim card?
Public Mobile sim should have 19 digits and starts with 89122. Please check the number again
if you are sure you have the correct sim card but unable to enter the sim card number, check with PM Customer Support and see if they can assist. Please open ticket using Public Mobile Expert Messaging using your Community/EverSafe account. Select Start a Chat to begin:
https://expert-messaging.publicmobile.ca/guest/pre-chat
**You'll get email/SMS alert when agent replies. or monitor here: https://expert-messaging.publicmobile.ca/message-centre
Monday
Purchased a physical SIM card from Amazon went to activate and have one extra digit (auto loaded the number that started with the 89122 prefix) and it will not take the physical SIM card
Any suggestions or do I just rack it up to $15 lesson and buy a physical SIM card directly online now that I have an account?
Is there someone I can contact directly into Tech Support or is it only the community which is good but don't want to bother
Monday - last edited Monday
it was NO and YES
the NO: when I said 2FA does not send to alternate phone number, i was referring to the the Alternate phone number entry on Profile Page under Account Info: https://myaccount.publicmobile.ca/en/account/my-profile
the YES: you can actually have 2FA code send to another phone number with a condition. You can go to Profile > Manage EverSafe ID and put another number there. But the restrictions is the number put in there cannot be used by EverSafe account for another Public Mobile or Telus account already
Monday
Hello @softech
I have concerns about this statement you made.
2FA does not send to alternate phone number
My understanding of the system is that you can send it to any mobile number that's not tied to any Public Mobile numbers or have an active Eversafe ID.
Can you confirm?
Hello @4PL2
Before you do any of this extra work, is there anyone you know that has a Public Mobile account with a SIM card so you can try it out first to make sure it even works? I'd hate to see you go through all these hoops only to find out things won't work.
Monday - last edited Monday
3. Login My Account, go to Profile page, click the pencil besides the sim card and you can update the sim card. Then. With your sim card inside the phone, reboot phone and test and make sure it works
1 and 2. 2FA does not send to alternate phone number, but it can be sent using email or Voicemail. BUT after the sim card change, make sure you have the sim card still in the phone, try logoff and login PM My Account couple times.
The first time, let the system send the 2FA code to you via SMS. Once that works, logout
Then try again. But this time, click Didn't Receive code or Resend code and click Send email or Send Voice Message to get the code via email or Voicemail. This would be how you get the code after you put the sim card in the router.
But note the first time getting the code via SMS is very important. You have to complete that once before Send email or voice message option will be available
if you like, you can also default the 2FA text to email or voicemail after successfully receive the code via text once. After you logged in My Account, go to Profile > Manage EverSafe ID and remove the phone number. Then the 2FA text will be defaulted to email.
4. for APN, sp.mb.com is correct. And here is the full APN details:
APN: sp.mb.com
Proxy:
Port:
Username: <blank>
Password: <blank>
Server:
MMSC: http://aliasredirect.net/proxy/mb/mmsc
MMS Proxy: mmscproxy.mobility.ca
MMS Port: 8799
MCC: 302
MNC: 220
Authentication Type: Not Set
APN Type: default,supl,mms
or default,mms,agps,supl,fota,hipri
(might need to include DUN for hotspot, please note case sensitive)
APN protocol: IPv4
APN roaming protocol: IPv4
APN enable/disable: APN enabled
or Turn APN on/off APN turned on
Bearer: Unspecified
MVNO (Mobile virtual network operator) type: GID
MVNO (Mobile virtual network operator)value: 4D (or try: 4D4F)