cancel
Showing results for 
Search instead for 
Did you mean: 

Activation

John4yo
Great Neighbour / Super Voisin

New member to this and it was not activated the data or even signal after I transfer

2 REPLIES 2

hTideGnow
Mayor / Maire

hi @John4yo 

First,  remove the old carrier sim card,  or if it the old carrier sim is esim, disable it from Sim Manager or Settings->Cellular

Then put the PM sim card in the phone, or if eSIM, you should be good 

Next,  go to Sim Manager or Settings->Cellular and check if PM sim is showing there.  Make sure the Public Mobile sim is enabled , or Turn on this line  option is toggled on.  Also, change the label to Primary

Reboot your phone and Reset network settings and test and confirm if all work or let us know of if any the following does not work: inbound and outbound calls, inbound and outbound text, mobile data.

if the sim not connecting, ask PM support agent to help.  You can submit  ticket by direct message:  
          https://productioncommunity.publicmobile.ca/t5/notes/composepage/note-to-user-id/22437 

Remember CS_agent will reply to your Community inbox within 2 to 4 hours, please check your inbox here:
           https://productioncommunity.publicmobile.ca/t5/notes/privatenotespage   

BKNS27
Mayor / Maire

@John4yo 

Did you reply to the confirmation text from your previous carrier with YES that you are porting over to PM?

If you did then reboot your phone by powering off then back on.

It could be that the porting was not completed so contact a CS_Agent to complete the porting.

https://productioncommunity.publicmobile.ca/t5/notes/composepage/note-to-user-id/22437